Easily hook up your Briggs. Animal engine.

Have you ever tried starting your Animal with the switch in the OFF position?
Have you ever had a "friend" drive by and turn your engine off?
The available push button kill switch replaces the Briggs. rocker switch.  The push button switch is spring loaded and must be held down for several seconds to kill the engine.  The switch is spring loaded to be normally "on".  The Animal Bracket also mounts the kill switch in a protected position that is easily accessible to the driver, but not to others driving by.

   This kart has the Animal Bracket mounted underneath the plastic cover.  The throttle cables and fuel pump are neatly hidden away underneath the Animal's plastic cover.  This installation makes the engine look very clean and sexy, but you have to remove the plastic cover to get to the throttle linkage and fuel pump.

     The Animal Bracket can mount directly on top of the Animal engine block (uses existing taped holes, no drilling or taping required).  This is the lightest installation.  You throw away the Briggs plastic cover and heavy steel mounting bracket and mount the Animal Bracket in their place.  Everything is easily accessible right on top of the engine.   To make the bracket easier to see in the picture it has not been painted, the bracket you will receive is painted Animal Orange to match your engine.

    Here the Animal Bracket is mounted right on top of the Animal's plastic cover.  This is the simplest installation, and puts everything right on top for easy access.  Once again, the bracket has not been painted for this photograph, the bracket you buy is painted Animal Orange to match your engine.

#8000 Animal Bracket with kill switch
$29.95 plus $6.95 for UPS ground shipping in the continental USA

#8001 Animal Bracket (no kill switch)
$22.95 plus $6.95 for UPS ground shipping in the continental USA

#8002 Kill Switch
$7.95 plus $6.95 for UPS ground shipping in the continental USA

contact us at:  sales@dealassoc.com